Tolerance Class ZZ Vermont Gage Steel Go Plug Gage 0.212 Gage Diameter

Industrial & Scientific Test, Measure & Inspect Dimensional Measurement Gauges Pin Tolerance Class ZZ Vermont Gage Steel Go Plug Gage 0.212 Gage Diameter Vermont Gage Steel Go Plug Gage, Tolerance Class ZZ,212" Gage Diameter,Vermont Gage,Tolerance Class ZZ Vermont Gage Steel Go Plug Gage 0.212 Gage Diameter,Tolerance Class ZZ Vermont Gage Steel Go Plug Gage 0.212 Gage Diameter,212" Gage Diameter: Hardware Pin Gauges: Industrial & Scientific,Vermont Gage Steel Go Plug Gage, Tolerance Class ZZ.Class ZZ Vermont Gage Steel Go Plug Gage 0.212 Gage Diameter Tolerance.
Vermont Gage Steel Go Plug Gage, Tolerance Class ZZ, 0.212' Gage Diameter: Hardware Pin Gauges: Industrial & Scientific. Vermont Gage Steel Go Plug Gage, Tolerance Class ZZ, 0.212" Gage Diameter: Hardware Pin Gauges: Industrial & Scientific. Supplied with a certificate of accuracy traceable to National Institute of Standards and Technology (NIST) 。 Go (+) gage for measuring the lower limit of a hole 。 Available in a range of sizes from .0040” to 1.0005” 。 Made from tool steel 60/64 Rockwell c scale (Rc) cold stabilized for durability 。 Class ZZ (tolerance of .0002”) for longer wear 。 The steel go (+) plug gage is a class ZZ inch gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to NIST is available for each gage, and each pin is marked with its size and direction of tolerance in sizes over .060”. Each gage is sealed in a volatile corrosion inhibitor (VCI) bag and packaged with a rust preventative. 。 All gages measure 2” long, are within .00001” round (per ASME B89.1.5), and have at least a 10-microinch finish for a smooth finish. This gage is made of tool steel 60/62 Rc (cold stabilized) for durability and is available with either a steel or black guard finish (to inhibit corrosion and for indicating wear). Sizes are available from .0040” to 1.0005” (increments of .001”), with a tolerance of +.0002” for longer wear. 。 Plug gages are precision ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes. They are available in different classes, based on acceptable tolerance (allowed deviation from the stated size). Standard tolerances and classes for cylindrical gages up to .825” are as follows: Class XX (.00002" or .0005 mm), Class X (.00004" or .0010 mm), Class Y (.00007" or .0018 mm), Class Z (.0001" or .0025mm), and Class ZZ (.0002" or .0050 mm). For gages with a wider diameter, tolerance gradually increases for each class. 。 Since 1968, Vermont Precision Tools, Inc. (VPT) has been manufacturing a variety of precision round and ground pins, perforators, and special punches. was formed in 1980, and manufactures a wide range of fixed limit gages. Located in Swanton, Vermont and Franklin, Kentucky, manufactures 98% of the products they sell and is ISO 9001:2000 and ISO 17025 quality certified. 。 。 。 。
Tolerance Class ZZ Vermont Gage Steel Go Plug Gage 0.212 Gage Diameter
Tolerance Class ZZ Vermont Gage Steel Go Plug Gage 0.212 Gage Diameter
Tolerance Class ZZ Vermont Gage Steel Go Plug Gage 0.212 Gage Diameter
Tolerance Class ZZ Vermont Gage Steel Go Plug Gage 0.212 Gage Diameter
Tolerance Class ZZ Vermont Gage Steel Go Plug Gage 0.212 Gage Diameter

Tolerance Class ZZ Vermont Gage Steel Go Plug Gage 0.212 Gage Diameter

¿TIENES ALGUNA DUDA? ¡PREGÚNTANOS LO QUE QUIERAS Y RESERVA TU PLAZA!

INFORMACIÓN BÁSICA SOBRE PROTECCIÓN DE DATOS:
Responsable: Instituto Panamericano de Implantología y rehabilitación oral (IPIRO).
Finalidad: Dar respuesta a las consultas/gestión de citas/envío de boletín informativo o comunicaciones comerciales.
Legitimación: Consentimiento del interesado.
Destinatarios: No se cederán datos a terceros, salvo obligación legal.
Derechos: Tiene derecho a acceder, rectificar y suprimir los datos, asi como otros derechos, como se explica en la información adicional.
Información adicional: Puede consultar la información adicional y detallada sobre Protección de Datos Personales en el Aviso legal y Política de privacidad.

NOS PODÉIS ENCONTRAR EN:

Tolerance Class ZZ Vermont Gage Steel Go Plug Gage 0.212 Gage Diameter

Tolerance Class ZZ Vermont Gage Steel Go Plug Gage 0.212 Gage Diameter, Vermont Gage Steel Go Plug Gage, Tolerance Class ZZ,212" Gage Diameter,Vermont Gage